通道离子替换磷灰石固溶体比较晶体化学XRD研究

采用单相共沉淀法和隋性气体保护下的固相反应法制备了不同通道离子替换固溶体磷灰石[X₁-X₂AP]。利用XRD对通道离子替换磷灰石固溶体进行了比较晶体化学研究,结果表明:晶胞参数随通道离子半径的增大,a₀增大,c₀反而减小,且OH-ClAP和F-OHAP变化呈线性关系,符合Vegard定律,而F-ClAP在富F^-端的变化不呈线性关系;由于[PO₄]四面体沿[101]方向的滑移,c₀随a₀的变化而变化,且c₀^-2与a₀^-2呈线性关系[c₀^-2=-a₀^-2+3.2348]。     

Carbon dioxide reduction under visible light: a comparison of cadmium sulfide and titania photocatalysts

1. Download : Download high-res image (135KB)
2. Download : Download full-size image

     

High-performance liquid chromatographic determination of Levetiracetam in human plasma: comparison of different sample clean-up procedures

An accurate and precise high-performance liquid chromatographic method using diode array detection for the determination of the novel antiepileptic, Levetiracetam, has been developed. Three clean-up procedures for the analysis of Levetiracetam in human plasma were implemented and evaluated, namely solid-phase extraction, deproteinization by addition of organic solvents and formation of insoluble salts. Adenosine was used as the internal standard for all three sample pretreatment procedures. Among the several cartridges used for solid-phase extraction, the hydrophilic-lypophilic balance (Oasis) HLB) phase provides the best extraction yield of Levetiracetam, together with high precision. With the two other clean-up procedures involving plasma deproteinization by addition of methanol or zinc sulphate, lower sensitivity and precision of the assays were obtained. However, they are cheaper and faster when compared with the solid-phase extraction procedure.     

Synthesis of Gels in the System Na2O-ZrO2-SiO2

Gels have been synthesized in the SiO₂-Na₂O-ZrO₂ system and calcined at various temperatures up to 700°C. They have been studied by infrared absorption spectroscopy. The position of the asymmetric stretching frequency of the SiO₄ unit is used as a tracer of the homogeneity. It is shown that sodium increases the solubility of zirconium in the silica matrix as already observed in fused glasses.     

Solid-phase synthesis of dihydrovirginiamycin S1, a streptogramin B antibiotic

We describe the first solid-phase synthesis of dihydrovirginiamycin S(1), a member of the streptogramin B family of antibiotics, which are nonribosomal-peptide natural products produced by Streptomyces. These compounds, along with the synergistic group A components, are "last line of defense" antimicrobial agents for the treatment of life-threatening infections such as vancomycin-resistant enterococci. The synthesis features an on-resin cyclization and is designed to allow production of streptogramin B analogues with diversification at positions 1', 1, 2, 3, 4, and 6. Several synthetic challenges known to hinder the synthesis of this class of compounds were solved, including sensitivity to acids and bases, and epimerization and rearrangements, through the judicious choice of deprotection conditions, coupling conditions, and synthetic strategy. This work should enable a better understanding of structure-activity relationships in the streptogramin B compounds, possible identification of analogues that bypass known resistance mechanisms, and perhaps the identification of analogues with novel biological activities.     

All-solid-state potentiometric sensors for ascorbic acid by using a screen-printed compatible solid contact

The development of all-solid-state potentiometric ion selective electrodes for monitoring of ascorbic acid, by using a screen-printed compatible solid contact is described. The applied methodology is based on the use of PVC membrane modified with some firstly-tested ionophores (triphenyltin(IV)chloride, triphenyltin(IV)hydroxide and palmitoyl-l-ascorbic acid) and a novel one synthesized in our laboratory (dibutyltin(IV) diascorbate). Synthesis protocol and some preliminary identification studies are given. A conductive graphite-based polymer thick film ink was used as an internal solid contact between the graphite electrode and the PVC membrane. The presence and the nature of the solid contact (plain or doped with lanthanum 2,6-dichlorophenolindophenol (DCPI)) seem to enhance the analytical performance of the electrodes in terms of sensitivity, dynamic range, and response time. The analytical performance of the constructed electrodes was evaluated with potentiometry, constant-current chronopotentiometry and electrochemical impedance spectroscopy (EIS). The interference effect of various compounds was also tested. The potential response of the optimized Ph₃SnCl-based electrode was linear against ascorbic acid concentration range 0.005-5.0 mM. The applicability of the proposed sensors in real samples was also tested. The detection limit was 0.002 mM ascorbic acid (50 mM phosphate, pH 5 in 50 mM KCl). The slope of the electrodes was super-Nernstian and pH dependent, indicating a mechanism involving a combination of charge transfer and ion exchange processes. Fabrication of screen-printed ascorbate ISEs has also been demonstrated.     

Characterization of the solid phases of paracetamol and fenamates at equilibrium in saturated solutions

Differential scanning calorimetry (DSC), supported by hot stage microscopy, IR spectroscopy and X-ray powder diffractometry, was used to investigate the characteristics of the solid phases of mefenamic, niflumic, and flufenamic acids and of paracetamol, before and after equilibration with saturated solutions in different solvents. Mixtures of Lewis base (dioxane and ethyl acetate) and amphiprotic solvents (ethanol and water) were prepared for evaluating the influence of both nature and polarity of the solvents. Solid-state analysis performed on the original samples (commercial products) made it possible to establish that paracetamol, mefenamic acid and flufenamic acid were in their respective Form I. No polymorphic modifications are known for niflumic acid. Paracetamol, niflumic and mefenamic acids did not show any change after equilibration with the various solvents or solvent mixtures, regardless of their different chemical nature. In contrast, DSC, IR and X-ray analyses revealed the partial recrystallization of flufenamic acid into its polymorphic Form III in solid phases at equilibrium with ethanol, ethyl acetate and their blends, as well as in dioxane-water mixtures containing 30 to 100% dioxane and in ethanol-water mixtures with a water content less than 50%. This revised version was published online in July 2006 with corrections to the Cover Date.     

Identification of micro-scale calorimetric devices

Micro-calorimetric devices using Si-based sensors are very useful for the study of gas–solid reactions, in which very low mass of reactants are necessary. But in fact the consequence of using flat detectors is an increase of the uncertainty in the measured energy. In this work a calorimetric gas sensor based on Xensor chip is analysed studying the local x–y contributions of dissipation to the sensitivity related to the value in the centre. We study also the effects of the gas-flow on the sensitivity, comparing the results obtained with two Xensor type chips. Finally we carry out a deeper analysis of the x–y effects on the calorimetric detector for dissipations in the reactant shell extremely close to the detector surface to visualize the link between the power density distribution and the output signal.     

Synthesis of functionalized rab GTPases by a combination of solution- or solid-phase lipopeptide synthesis with expressed protein ligation

Prenylated proteins with non-native functionalities are generally very difficult to obtain by recombinant or enzymatic means. The semisynthesis of preparative amounts of prenylated Rab guanosine triphosphatases (GTPases) from recombinant proteins and synthetic prenylated peptides depends largely on the availability of functionalised prenylated peptides corresponding to the proteins' native structure or modifications thereof. Here, we describe and compare solution-phase and solid-phase strategies for the generation of peptides corresponding to the prenylated C terminus of Rab7 GTPase. The solid-phase with utilisation of a hydrazide linker emerges as the more favourable approach. It allows a fast and practical synthesis of pure peptides and gives a high degree of flexibility in their modification. To facilitate the analysis of semisynthetic proteins, the synthesised peptides were equipped with a fluorescent group. Using the described approach, we introduced fluorophores at several different positions of the Rab7 C terminus. The position of the incorporated fluorescent groups in the peptides did not influence the protein-ligation reaction, as the generated peptides could be ligated onto thioester-tagged Rab7. However, it was found that the positioning of the fluorescent group had an influence on the functionality of the Rab7 proteins; analysis of the interaction of the semisynthetic Rab7 proteins with REP (Rab escort protein) and GDI (guanosine diphosphate dissociation inhibitor) molecules revealed that modification of the peptide side chains or of the C-terminal isoprenoid did not significantly interfere with complex formation. However, functionalisation of the C terminus was found to have an adverse effect on complex formation and stability, possibly reflecting low structural flexibility of the Rab GDI/REP molecules in the vicinity of the lipid-binding site.     

Reactivity in the solid state between CoWO4 and RE2WO6 where RE = Sm, Eu, Gd

Reactivity in the solid state between CoWO₄ and some rare-earth metal tungstates RE₂WO₆ (RE = Sm, Eu, Gd) was investigated by the XRD method. Two families of new isostructural cobalt and rare-earth metal tungstates, Co₂RE₂W₃O₁₄ and CoRE₄W₃O₁₆, were synthesized. The Co₂RE₂W₃O₁₄ phases are formed by heating in air the CoWO₄ and RE₂WO₆ compounds mixed at the molar ratio 2:1, while the CoRE₄W₃O₁₆ phases are synthesized at the molar ratio of CoWO₄/RE₂WO₆ equals to 1:2. The Co₂RE₂W₃O₁₄ phases as well as the CoRE₄W₃O₁₆ compounds crystallize in the orthorhombic system. The Co₂RE₂W₃O₁₄ and CoRE₄W₃O₁₆ compound melt above 1150 °C. A melting manner of the Co₂RE₂W₃O₁₄ and CoRE₄W₃O₁₆ compounds was determined in an inert atmosphere. The formation of CoWO_4−x phase was observed during heating in an inert atmosphere.